Canning supply, install and commission 300tph sand and aggregate plant with four field conveyors, a stockpile conveyor and remote mobile track mounted hopper feeder. | Hub-4

2022-06-25 08:21:37 By : Mr. Jay Huang

Canning Conveyor recently completed a project for full design, supply, installation & commissioning which included four 750mm conveyors, a 74m stockpiling conveyor and a remote mobile track mounted hopper feeder, all now fully operational at a UK Quarry.

Four standard Canning type field conveyors all with 750mm belts, 150m, 250m, 1100m and 320m long included jib heads, loop take-up, grading sections and heavy-duty tail end loading sections which incorporated impact idlers under the feed areas. Intermediate bays incorporated the Canning Polymer Suspended Idler Sets which have steel safety handles and polymer return rollers. Emergency stop pull wires were fitted centrally down each conveyor with Cannoflex Conveyor Belts EP500/3 which were all site vulcanised onto the conveyors following installation.

The 1100mm long field conveyor included a 90kw double drum drive as standard. A single roll belt weigher was fitted on the 320m long conveyor.

The Field Conveyors fed onto a 750mm x 74m long surge stockpile conveyor, incorporating a 43m long lattice frame section with walkway access both sides which was inclined 15 degrees to give a 20m high stockpile.

A primary polycarbonate self-adjusting belt scraper and secondary tungsten tipped belt scraper and curved corrugated plastisol coated steel belt covers with hinged inspection hatches were also included.

Canning designed a 15-tonne capacity mobile track mounted hopper feeder, to feed the material from remote dig locations onto the field conveyors. This unit included a hydraulically driven belt feeder and track with a fixed displacement hydraulic motor with motion control and brake release valves driven by a an on-board 90HP diesel engine drive.

A track group with 300mm triple bartrack shoes, lower rollers, front idler groups, sprockets and anti-track jump record and tensioner device were included within the specification. The 750mm belt feeder included 127mm diameter supported troughing idler sets, rubber covered impact type under loading area.

The equipment has been successfully commissioned and is fully operational with the client expressing their pleasure with the overall performance of the conveyors which are now handling the designed 300tph to full satisfaction. The client also gave feedback on the performance of the belt scrapers keeping the belts clean with a difficult material type.

With market-leading print and digital platforms for the Recycling, Quarrying, and Bulk Material Handling Industries we provide a comprehensive, and virtually unique route to market. Our bi-monthly magazine is available in print or electronic mediums delivering the latest news on new product launches, and industry projects directly to individually addressed on-site locations throughout the UK & Northern Ireland. Such is the demand we enjoy a regular pass-on readership of 2.5 providing a total of in excess of 15,000 regular readers of the magazine.

We work closely with companies to provide on-site editorials focusing on their clients feedback. All wrapped up with on-site recorded interviews, professional photography, delivering dynamic stories and images that enhance the stories. We also attend open days & events and promote these by writing engaging editorial pieces published in our magazine, website & e-newsletter. Let HUB-4 distribute magazines at your open day and we'll promote your event for you in the news and events section of our website prior to the event.

Our bi-monthly magazine is sent directly to 6,000+ quarries, recycling sites and bulk handling plants, with a pass-on rate of 2.5 giving an estimated readership of 15,000 throughout the UK.

© 2022 HUB Digital Media Ltd | Office Address: Dunston Innovation Centre, Dunston Rd, Chesterfield, S41 8NG Registered Address: 27 Old Gloucester Street, London, WC1N 3AX. Registered at Companies House, Company No: 5670516.